Corrosion control materials are available at Champion Corrosion Products Inc. as listed below. Click here to find cathodic protection, rectifiers, and standard junction boxes.
Graphite Anodes, Center Connected, Epoxy Cap by Champion Corrosion
Graphite anodes have been a standard for cathodic protection for many years. They are considered a reliable impressed current anode and are used extensively throughout the industry. Low in cost, graphite anodes, used in conjunction with coke breeze backfill, provide long-term performance characteristics for many cathodic protection applications.
Anode Size
Treated Weight
Approx. Area
3" x 60"
26 lbs
4.0 sq ft
4" x 80"
64 lbs
7.0 sq ft
Tubular Anodes, Center Connected, Epoxy Cap by Champion Corrosion
High silicon, cast iron, tubular anodes are used for a variety of cathodic protection applications including deep well anode systems, shallow anode installations, offshore applications as well as many other types of cathodic protection systems.
Tubular anodes are popular for their increased surface area, higher current output, centered cable connection and enhanced sealing properties due to the additional sealing materials used inside the anode.
3" Detectable Cathodic Protection Burial Tape
Detectable Cathodic Protection Burial Tape Available in Yellow or Red
LORESCO RS-3 Premium Earth Contact Backfill
A premium earth contact backfill for cathodic protection, combining low resistivity, positive electrical contact, and easy installation by pouring.
Aluminum “Redhead or Bluehead Heater Treater” Anodes
The typical “heater treater” anode is a 3" diameter cast anode with a length of either 30 or 60 inches. A 3/4" diameter all-thread rod is cast into the center of the anode and extends outside the anode from either one or both ends. Heater Treater Anodes (also available in 3/8" eyebolt).